A BETTER FILTRATION

EDM
APPLICATION

EDM
APPLICATION

EDM? The Transor System means reduced machining time = faster cuts

Without clean dielectric, microscopic particles present in the oil can interfere with effective machining of the workpiece. If present in sufficient quantities, the frequency of discharge will be reduced and the electrode will back away from the cut. Transor’s One Micron Filtration (OMF) helps to eliminate this contamination contributing to efficient performance at optimum machining speed.

This results in:

Improved Accuracy
Geometric shapes may be deformed and tolerances not achieved when dielectric is contaminated by conductive particles. Achieve the repeatability and close tolerance requirements of multi-cavity mold applications.

Reduced Pitting = Reduced Polishing
Particles bridging the gap between the electrode and workpiece convert the AC current used in EDM to DC current. This causes a concentrated discharge, resulting in arcing and pitting that damages the electrode or the workpiece. With OMF, dielectric provides a more consistent current allows finer surface finishes that reduce polishing time.

OTHER APPLICATIONS

CERAMIC APPLICATIONS

LAPPING

TOOL & CUTTER GRINDING

cartridge-tipped circular saws

OTHER APPLICATIONS

CARTRIDGE-TIPPED CIRCULAR SAWS

LAPPING

TOOL & CUTTER GRINDING

CERAMICS

find out WHAT OMF CAN DO FOR
YOUR APPLICATION

Let us know what your application needs are, and we can help you save time and money.

Transor Website Contact Form